This is expected by WPT. For this to work, we must be able to determine
the network partition key for shared worker environments. So we now set
a top-level origin for these environments, with a FIXME to implement it
in accordance with the Client-Side Storage Partitioning spec.
This ensures that we are explicitly declaring the allocator to use when
allocating a cell(-inheriting) type, instead of silently falling back
to size-based allocation.
Since this is done in allocate_cell, this will only be detected for
types that are actively being allocated. However, since that means
they're _not_ being allocated, that means it's safe to not declare
an allocator to use for those. For example, the base TypedArray<T>,
which is never directly allocated and only the defined specializations
are ever allocated.
Every function call allocates an ExecutionContext with a trailing array
of Values for registers, locals, constants, and arguments. Previously,
the constructor would initialize all slots to js_special_empty_value(),
but constant slots were then immediately overwritten by the interpreter
copying in values from the Executable before execution began.
To eliminate this redundant initialization, we rearrange the layout from
[registers | constants | locals] to [registers | locals | constants].
This groups registers and locals together at the front, allowing us to
initialize only those slots while leaving constant slots uninitialized
until they're populated with their actual values.
This reduces the per-call initialization cost from O(registers + locals
+ constants) to O(registers + locals).
Also tightens up the types involved (size_t -> u32) and adds VERIFYs to
guard against overflow when computing the combined slot counts, and to
ensure the total fits within the 29-bit operand index field.
Issue #6294 describes an edge case where the browser crash if the same
module is loaded three times in a document, but all attempts fail.
Failure scenario:
1. Module load 1 set the state to "Fetching"
2. Module load 2 registers a callback to `on_complete` since the
current state is "Fetching"
3. Module load 1 finish with a failure, invoking the callback for load
number 2
4. Module load 3 cause a crash. The state is neither "Fetching" or
"ModuleScript", so we'll reset the state to "Fetching". This invokes
the callback for module load 2 again, now with an unexpected state
which will cause an assert violation.
Proposed fix is to remove the condition that invokes `on_complete`
immediately for successfully loaded modules only, the callback should
be invoked regardless of whether the fetch succeeded or failed.
This reveals a separate bug in HTMLScriptElement, where
`mark_as_ready()` can be invoked before
`m_steps_to_run_when_the_result_is_ready` is assigned.
This appears to be a spec bug, reported as
https://github.com/whatwg/html/issues/12073 and addressed by delaying
the callback by a task, similar to the issue was resolved for inline
scripts.
The end goal here is for LibHTTP to be the home of our RFC 9111 (HTTP
caching) implementation. We currently have one implementation in LibWeb
for our in-memory cache and another in RequestServer for our disk cache.
The implementations both largely revolve around interacting with HTTP
headers. But in LibWeb, we are using Fetch's header infra, and in RS we
are using are home-grown header infra from LibHTTP.
So to give these a common denominator, this patch replaces the LibHTTP
implementation with Fetch's infra. Our existing LibHTTP implementation
was not particularly compliant with any spec, so this at least gives us
a standards-based common implementation.
This migration also required moving a handful of other Fetch AOs over
to LibHTTP. (It turns out these AOs were all from the Fetch/Infra/HTTP
folder, so perhaps it makes sense for LibHTTP to be the implementation
of that entire set of facilities.)
An upcoming commit will migrate the contents of Headers.h/cpp to LibHTTP
for use outside of LibWeb. These CORS and MIME helpers depend on other
LibWeb facilities, however, so they cannot be moved.
We need to prevent these mutation observers from being garbage
collected, and since they are only part of SimilarOriginWindowAgent and
themselves as part of the intrusive list, nobody is visiting them.
Make the list of pending mutation observers a GC::RootVector so we keep
them alive until they have been processed in the microtask.
Restores 1400+ WPT subtest passes in `dom/nodes/Element-classlist.html`.
In the current spec, MutationObservers are explicitly added to the
pending mutation observers list, and they are removed when that list is
cleared in the "notify mutation observers" microtask.
This solves some issues with slotchange events.
As noted, we delay actually emptying the list of pending mutation
observers until after we're finished with the "clone", because we can't
actually copy or move the intrusive list. As far as I am aware, this
should not affect behaviour because only one microtask can run at once.
187f8c54 made `HTML::Task` runnable for destroyed documents, and this
change aligns microtask behavior with that. This is required for an
upcoming change that switches Fetch to be unbuffered by default. During
navigation, fetching the new document is initiated by the previous
document, which means we need to allow microtasks created in the
previous document's realm to run even after that document has been
destroyed.
We have a couple of ways to designate spec notes and (our) developer
notes in comments, but we never really settled on a single approach. As
a result, we have a bit of a mixed bag of note comments on our hands.
To the extent that I could find them, I changed developer notes to
`// NB: ...` and changed spec notes to `// NOTE: ...`. The rationale for
this is that in most web specs, notes are prefixed by `NOTE: ...` so
this makes it easier to copy paste verbatim. The choice for `NB: ...` is
pretty arbitrary, but it makes it stand out from the regular spec notes
and it was already in wide use in our codebase.
Atlassian login gets the base URL for its module scripts by throwing an
error and pulling out the current script's URL from error.stack with
regex.
Since we only returned a basename for module scripts, it would fail to
match and try and use `/` as a base URL (because it does
[matched_string] + "/"), which is not a valid base URL.
This has quite a lot of fall out. But the majority of it is just type or
UDL substitution, where the changes just fall through to other function
calls.
By changing property key storage to UTF-16, the main affected areas are:
* NativeFunction names must now be UTF-16
* Bytecode identifiers must now be UTF-16
* Module/binding names must now be UTF-16
Instead, porting over all users to use the newly created
Origin::create_opaque factory function. This also requires porting
over some users of Origin to avoid default construction.
These are not associated with a javascript realm, so to avoid
confusion about which realm these need to be created in, make
all of these objects a GC::Cell, and deal with the fallout.
It turns out it was a mistake to make this a virtual since
ServiceWorkerAgents are effectively the exact same as
DedicatedWorkerAgents and SharedWorkerAgents just with [[CanBlock]]
set to false.
To allow for adding the concept of a WorkerAgent to be reused
between shared and dedicated workers. An event loop is the
commonality between the different agent types, though, there
are some differences between those event loops which we customize
on the construction of the HTML::EventLoop.
This is better because:
- Better data locality
- Allocate vector for registers+constants+locals+arguments in one go
instead of allocating two vectors separately
similar-origin window agents have the [[CanBlock]] flag set to false.
Achieve this by hooking up JS's concept with an agent to HTML::Agent.
For now, this is only hooked up to the similar-origin window agent
case but should be extended to the other agent types in the future.
While debugging a spec-compliant implementation of ReadableStreamPipeTo,
I spent a lot of time inspecting promise internals. This is much less
noisy if we halve the number of temporary promises.
The special empty value (that we use for array holes, Optional<Value>
when empty and a few other other placeholder/sentinel tasks) still
exists, but you now create one via JS::js_special_empty_value() and
check for it with Value::is_special_empty_value().
The main idea here is to make it very unlikely to accidentally create an
unexpected special empty value.
PrimitiveString is now internally either UTF-8, UTF-16, or both.
We no longer convert them to/from ByteString anywhere, nor does VM have
a ByteString cache.
The intent is that this will replace the separate Task Manager window.
This will allow us to more easily add features such as actual process
management, better rendering of the process table, etc. Included in this
page is the ability to sort table rows.
This also lays the ground work for more internal `about` pages, such as
about:config.
Exactly one place seems to define these at the moment: service worker
clients. Since we don't have a type for these and just use
EnvironmentSettingsObject, I've put it there.
This patch removes those unused 2 algorithms:
1. `fetch_internal_module_script_graph`
2. `fetch_descendants_of_a_module_script`
Those 2 algorithms were removed in spec and are not used in our
codebase.
This is required to store Content Security Policies, as their
Directives are implemented as subclasses with overridden virtual
functions. Thus, they cannot be stored as generic Directive classes, as
it'll lose the ability to call overridden functions when they are
copied.
Before this change, Agent held on to all of the live MutationObserver
objects via GC::Root. This prevented them from ever getting
garbage-collected.
Instead of roots, we now use a simple IntrusiveList and remove them
from it in the finalizer for MutationObserver.
This fixes a massive GC leak on Speedometer.
This makes it more convenient to use the 'relvant agent' concept,
instead of the awkward dynamic casts we needed to do for every call
site.
mutation_observers is also changed to hold a GC::Root instead of raw
GC::Ptr. Somehow this was not causing problems before, but trips up CI
after these changes.
There are essentially 3 URL parsing AOs defined by the spec:
1. Parse a URL
2. Encoding parse a URL
3. Encoding parse a URL and serialize the result
Further, these are replicated between the Document and the ESO.
This patch defines these methods in accordance with the spec and updates
existing users to invoke the correct method. In places where the correct
method is ambiguous, we use the encoding parser to preserve existing ad-
hoc behavior.
These variables are all captured in queued events or other event loop
tasks, but are all guarded by event loop spins later in the function.
The IGNORE_USE_IN_ESCAPING_LAMBDA will soon be required for all locals
that are captured by ref in GC::Function as well as AK::Function.
There was a bug in the HTML proposal where a synthetic realm settings
object's principal realm was a shadow realm if there were nested shadow
realms, which this assertion catches more directly (rather than later
down the track, where it is used).
We were meant to also assert for this case, but we were previously
returning early.
This was removed from the ShadowRealm HTML spec integration PR after my
suggestion as it is not used anywhere, and I don't believe it would ever
need to be used in the future or by other specs.
An environment settings object will return a copy to the URL. From a
quick glance, we could probably make an environment settings object
return a reference to one, but let's just change this code to make
a copy since its not safe to rely on that.
