This is instead of the UID:GID, since that was allowing some very bad
information leaks like spawning "su" as an unprivileged user and having
full /proc access to it.
Work towards #4504.
ProcFS /proc/<pid>/vm map info no longer contains two `purgeable` keys.
The second `purgeable` key has been removed and replaced with keys for
`kernel` and `cacheable`.
This implements a number of changes related to time:
* If a HPET is present, it is now used only as a system timer, unless
the Local APIC timer is used (in which case the HPET timer will not
trigger any interrupts at all).
* If a HPET is present, the current time can now be as accurate as the
chip can be, independently from the system timer. We now query the
HPET main counter for the current time in CPU #0's system timer
interrupt, and use that as a base line. If a high precision time is
queried, that base line is used in combination with quering the HPET
timer directly, which should give a much more accurate time stamp at
the expense of more overhead. For faster time stamps, the more coarse
value based on the last interrupt will be returned. This also means
that any missed interrupts should not cause the time to drift.
* The default system interrupt rate is reduced to about 250 per second.
* Fix calculation of Thread CPU usage by using the amount of ticks they
used rather than the number of times a context switch happened.
* Implement CLOCK_REALTIME_COARSE and CLOCK_MONOTONIC_COARSE and use it
for most cases where precise timestamps are not needed.
Problem:
- `(void)` simply casts the expression to void. This is understood to
indicate that it is ignored, but this is really a compiler trick to
get the compiler to not generate a warning.
Solution:
- Use the `[[maybe_unused]]` attribute to indicate the value is unused.
Note:
- Functions taking a `(void)` argument list have also been changed to
`()` because this is not needed and shows up in the same grep
command.
Fix some problems with join blocks where the joining thread block
condition was added twice, which lead to a crash when trying to
unblock that condition a second time.
Deferred block condition evaluation by File objects were also not
properly keeping the File object alive, which lead to some random
crashes and corruption problems.
Other problems were caused by the fact that the Queued state didn't
handle signals/interruptions consistently. To solve these issues we
remove this state entirely, along with Thread::wait_on and change
the WaitQueue into a BlockCondition instead.
Also, deliver signals even if there isn't going to be a context switch
to another thread.
Fixes#4336 and #4330
This makes the Scheduler a lot leaner by not having to evaluate
block conditions every time it is invoked. Instead evaluate them as
the states change, and unblock threads at that point.
This also implements some more waitid/waitpid/wait features and
behavior. For example, WUNTRACED and WNOWAIT are now supported. And
wait will now not return EINTR when SIGCHLD is delivered at the
same time.
Use the TimerQueue to expire blocking operations, which is one less thing
the Scheduler needs to check on every iteration.
Also, add a BlockTimeout class that will automatically handle relative or
absolute timeouts as well as overriding timeouts (e.g. socket timeouts)
more consistently.
Also, rework the TimerQueue class to be able to fire events from
any processor, which requires Timer to be RefCounted. Also allow
creating id-less timers for use by blocking operations.
This makes misses in the BlockBasedFS's LRU block cache faster by
storing the cache entries in one of two doubly-linked list.
Dirty and clean cache entries are kept in two separate lists, and
move between them when their state changes. This can probably be
improved upon further.
If the inode's block list cache is empty, we forgot to assign the
result of computing the block list. The fact that this worked anyway
makes me wonder when we actually don't have a cache..
Thanks to szyszkienty for spotting this! :^)
Instead of doing a linear scan of the entire cache when doing a lookup,
we now have a nice O(1) HashMap in front of the cache.
The cache miss case can still be improved, this patch really only helps
the cache hit case.
This dramatically improves cached filesystem I/O. :^)
Since we're using UserOrKernelBuffers, SMAP will be automatically
disabled when we actually access the buffer later on. There's no need
to disable it wholesale across the entire read/write operations.
This is a new "browse" permission that lets you open (and subsequently list
contents of) directories underneath the path, but not regular files or any other
types of files.
e2fsck was complaining about blocks being allocated in an inode's list
of direct blocks while at the same time being free in the block bitmap.
It was easy to reproduce by creating a file with non-zero length and
then truncating it. This fixes the issue by clearing out the direct
block list when resizing a file to 0.
This makes most operations thread safe, especially so that they
can safely be used in the Kernel. This includes obtaining a strong
reference from a weak reference, which now requires an explicit
call to WeakPtr::strong_ref(). Another major change is that
Weakable::make_weak_ref() may require the explicit target type.
Previously we used reinterpret_cast in WeakPtr, assuming that it
can be properly converted. But WeakPtr does not necessarily have
the knowledge to be able to do this. Instead, we now ask the class
itself to deliver a WeakPtr to the type that we want.
Also, WeakLink is no longer specific to a target type. The reason
for this is that we want to be able to safely convert e.g. WeakPtr<T>
to WeakPtr<U>, and before this we just reinterpret_cast the internal
WeakLink<T> to WeakLink<U>, which is a bold assumption that it would
actually produce the correct code. Instead, WeakLink now operates
on just a raw pointer and we only make those constructors/operators
available if we can verify that it can be safely cast.
In order to guarantee thread safety, we now use the least significant
bit in the pointer for locking purposes. This also means that only
properly aligned pointers can be used.
When computing the list of blocks to deallocate when freeing an inode,
we would stop collecting blocks after reaching the inode's block count.
Since we're getting rid of the inode, we need to also include the meta
blocks used by the on-disk block list itself.
If you try to do this (e.g "mv directory directory"), sys$rename() will
now fail with EDIRINTOSELF.
Dr. POSIX says we should return EINVAL for this, but a custom error
code allows us to print a much more helpful error message when this
problem occurs. :^)
Problem:
- `constexpr` functions are decorated with the `inline` specifier
keyword. This is redundant because `constexpr` functions are
implicitly `inline`.
- [dcl.constexpr], §7.1.5/2 in the C++11 standard): "constexpr
functions and constexpr constructors are implicitly inline (7.1.2)".
Solution:
- Remove the redundant `inline` keyword.
The block group indices are 1-based for some reason. Because of that,
we were forgetting to check in the very last block group when doing
block allocation. This caused block allocation to fail even when the
superblock indicated that we had free blocks.
Fixes#3674.
First of all, this fixes a dumb info leak where we'd write kernel heap
addresses (StringImpl*) into userspace memory when reading a watcher.
Instead of trying to pass names to userspace, we now simply pass the
child inode index. Nothing in userspace makes use of this yet anyway,
so it's not like we're breaking anything. We'll see how this evolves.
Before e06362de9487806df92cf2360a42d3eed905b6bf this was a sneaky buffer
overflow. BufferStream did not do range checking and continued to write
past the allocated buffer (the size of which was controlled by the
user.)
The issue surfaced after my changes because OutputMemoryStream does
range checking.
Not sure how exploitable that bug was, directory entries are somewhat
controllable by the user but the buffer was on the heap, so exploiting
that should be tough.
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
I decided to modify MappedROM.h because all other entried in Forward.h
are also classes, and this is visually more pleasing.
Other than that, it just doesn't make any difference which way we resolve
the conflicts.
Since "rings" typically refer to code execution and user processes
can also execute in ring 0, rename these functions to more accurately
describe what they mean: kernel processes and user processes.
Instead of FileDescriptor branching on the type of File it's wrapping,
add a File::stat() function that can be overridden to provide custom
behavior for the stat syscalls.
Add an ExpandableHeap and switch kmalloc to use it, which allows
for the kmalloc heap to grow as needed.
In order to make heap expansion to work, we keep around a 1 MiB backup
memory region, because creating a region would require space in the
same heap. This means, the heap will grow as soon as the reported
utilization is less than 1 MiB. It will also return memory if an entire
subheap is no longer needed, although that is rarely possible.
A change introduced in 5e01234 made it the resposibility of each
filesystem to have the file types returned from
'traverse_as_directory' match up with the DT_* types.
However, this caused corruption of the Ext2FS file format because
the Ext2FS uses 'traverse_as_directory' internally when manipulating
the file system. The result was a mixture between EXT2_FT_* and DT_*
file types in the internal Ext2FS structures.
Starting with this commit, the conversion from internal filesystem file
types to the user facing DT_* types happens at a later stage,
in the 'FileDescription::get_dir_entries' function which is directly
used by sys$get_dir_entries.
This fixes an issue we had in the git port where git would not
recognize untracked files (for example in 'git status').
When git used readdir, the 'd_type' field in the dirent struct contained
bad values (Specifically, it contained the values defiend in
Kernel/FileSystem/ext2_fs.h instead of the ones in LibC/dirent.h).
After this fix, we can create a new git repository with 'git init', and
then stage and commit files as usual.
MemoryManager cannot use the Singleton class because
MemoryManager::initialize is called before the global constructors
are run. That caused the Singleton to be re-initialized, causing
it to create another MemoryManager instance.
Fixes#3226
Unlike DirectoryEntry (which is used when constructing directories),
DirectoryEntryView does not manage storage for file names. Names are
just StringViews.
This is much more suited to the directory traversal API and makes
it easier to implement this in file system classes since they no
longer need to create temporary name copies while traversing.
Pledges and Veil state don't really make sense for kernel mode
processes, as they can do what ever they want since they are in
kernel mode. Make this clear in the system monitor UI by marking
these entries as null.
The SI prefixes "k", "M", "G" mean "10^3", "10^6", "10^9".
The IEC prefixes "Ki", "Mi", "Gi" mean "2^10", "2^20", "2^30".
Let's use the correct name, at least in code.
Only changes the name of the constants, no other behavior change.
This would have caused an issue later when we enable -Wmissing-declarations, as
the compiler didn't see that Kernel::all_inodes() was being used elsewhere, too.
Also, this means that if the type changes later, there's not going to be weird
run-time issues, but rather a nice type error during compile time.
This enables a nice warning in case a function becomes dead code. Also, in case
of signal_trampoline_dummy, marking it external (non-static) prevents it from
being 'optimized away', which would lead to surprising and weird linker errors.
I found these places by using -Wmissing-declarations.
The Kernel still shows these issues, which I think are false-positives,
but don't want to touch:
- Kernel/Arch/i386/CPU.cpp:1081:17: void Kernel::enter_thread_context(Kernel::Thread*, Kernel::Thread*)
- Kernel/Arch/i386/CPU.cpp:1170:17: void Kernel::context_first_init(Kernel::Thread*, Kernel::Thread*, Kernel::TrapFrame*)
- Kernel/Arch/i386/CPU.cpp:1304:16: u32 Kernel::do_init_context(Kernel::Thread*, u32)
- Kernel/Arch/i386/CPU.cpp:1347:17: void Kernel::pre_init_finished()
- Kernel/Arch/i386/CPU.cpp:1360:17: void Kernel::post_init_finished()
No idea, not gonna touch it.
- Kernel/init.cpp:104:30: void Kernel::init()
- Kernel/init.cpp:167:30: void Kernel::init_ap(u32, Kernel::Processor*)
- Kernel/init.cpp:184:17: void Kernel::init_finished(u32)
Called by boot.S.
- Kernel/init.cpp:383:16: int Kernel::__cxa_atexit(void (*)(void*), void*, void*)
- Kernel/StdLib.cpp:285:19: void __cxa_pure_virtual()
- Kernel/StdLib.cpp:300:19: void __stack_chk_fail()
- Kernel/StdLib.cpp:305:19: void __stack_chk_fail_local()
Not sure how to tell the compiler that the compiler is already using them.
Also, maybe __cxa_atexit should go into StdLib.cpp?
- Kernel/Modules/TestModule.cpp:31:17: void module_init()
- Kernel/Modules/TestModule.cpp:40:17: void module_fini()
Could maybe go into a new header. This would also provide type-checking for new modules.
This compiles, and fixes two bugs:
- setpgid() confusion (see previous commit)
- tcsetpgrp() now allows to set a non-empty process group even if
the group leader has already died. This makes Serenity slightly
more POSIX-compatible.
This compiles, and contains exactly the same bugs as before.
The regex 'FIXME: PID/' should reveal all markers that I left behind, including:
- Incomplete conversion
- Issues or things that look fishy
- Actual bugs that will go wrong during runtime
In #3001 I was trying to fix result propagation issues, and
I actually just introduced another one. Luckily Ben spotted
it in the diff after it was in the tree, thanks Ben!
This function did a const_cast internally which made the call side look
"safe". This method is removed completely and call sites are replaced
with ByteBuffer::wrap(const_cast<void*>(data), size) which makes the
behaviour obvious.
Certain implementations of Inode::directory_entry_count were calling
functions which returned errors, but had no way of surfacing them.
Switch the return type to KResultOr<size_t> and start observing these
error paths.
Allow passing in an optional timeout to Thread::block and move
the timeout check out of Thread::Blocker. This way all Blockers
implicitly support timeouts and don't need to implement it
themselves. Do however allow them to override timeouts (e.g.
for sockets).
We need to have a Thread lock to protect threading related
operations, such as Thread::m_blocker which is used in
Thread::block.
Also, if a Thread::Blocker indicates that it should be
unblocking immediately, don't actually block the Thread
and instead return immediately in Thread::block.
By making the Process class RefCounted we don't really need
ProcessInspectionHandle anymore. This also fixes some race
conditions where a Process may be deleted while still being
used by ProcFS.
Also make sure to acquire the Process' lock when accessing
regions.
Last but not least, there's no reason why a thread can't be
scheduled while being inspected, though in practice it won't
happen anyway because the scheduler lock is held at the same
time.
To be more in line with other parts of Serenity's procfs, the
"key: value" format of /proc/cpuinfo was replaced with JSON, namely
an array of objects (one for each core).
The available keys remain the same, though "features" has been changed
from a space-separated string to an array of strings.
We now have BlockResult::WokeNormally and BlockResult::NotBlocked,
both of which indicate no error. We can no longer just check for
BlockResult::WokeNormally and assume anything else must be an
interruption.
We can now properly initialize all processors without
crashing by sending SMP IPI messages to synchronize memory
between processors.
We now initialize the APs once we have the scheduler running.
This is so that we can process IPI messages from the other
cores.
Also rework interrupt handling a bit so that it's more of a
1:1 mapping. We need to allocate non-sharable interrupts for
IPIs.
This also fixes the occasional hang/crash because all
CPUs now synchronize memory with each other.
FileBackedFileSystem is one that's backed by (mounted from) a file, in other
words one that has a "source" of the mount; that doesn't mean it deals in
blocks. The hierarchy now becomes:
* FS
* ProcFS
* DevPtsFS
* TmpFS
* FileBackedFS
* (future) Plan9FS
* BlockBasedFS
* Ext2FS
There isn't an easy way to retreive all register contents anymore,
so remove this functionality. We do have the ability to trace
processes, so it shouldn't really be needed anymore.
These APIs were clearly modeled after Ext2FS internals, and make perfect sense
in Ext2FS context. The new APIs are more generic, and map better to the
semantics exported to the userspace, where inode identifiers only appear in
stat() and readdir() output, but never in any input.
This will also hopefully reduce the potential for races (see commit c44b4d61f3).
Lastly, this makes it way more viable to implement a filesystem that only
synthesizes its inodes lazily when queried, and destroys them when they are no
longer in use. With inode identifiers being used to reference inodes, the only
choice for such a filesystem is to persist any inode it has given out the
identifier for, because it might be queried at any later time. With direct
references to inodes, the filesystem will know when the last reference is
dropped and the inode can be safely destroyed.
This fixes a bug where the mode of a FIFO was reported as 001000 instead
of 0010000 (you see the difference? me nethier), and hopefully doesn't
introduce new bugs. I've left 0777 and similar in a few places, because
that is *more* readable than its symbolic version.
Get rid of the weird old signature:
- int StringType::to_int(bool& ok) const
And replace it with sensible new signature:
- Optional<int> StringType::to_int() const
.. and make travis run it.
I renamed check-license-headers.sh to check-style.sh and expanded it so
that it now also checks for the presence of "#pragma once" in .h files.
It also checks the presence of a (single) blank line above and below the
"#pragma once" line.
I also added "#pragma once" to all the files that need it: even the ones
we are not check.
I also added/removed blank lines in order to make the script not fail.
I also ran clang-format on the files I modified.
This adds support for MS_RDONLY, a mount flag that tells the kernel to disallow
any attempts to write to the newly mounted filesystem. As this flag is
per-mount, and different mounts of the same filesystems (such as in case of bind
mounts) can have different mutability settings, you have to go though a custody
to find out if the filesystem is mounted read-only, instead of just asking the
filesystem itself whether it's inherently read-only.
This also adds a lot of checks we were previously missing; and moves some of
them to happen after more specific checks (such as regular permission checks).
One outstanding hole in this system is sys$mprotect(PROT_WRITE), as there's no
way we can know if the original file description this region has been mounted
from had been opened through a readonly mount point. Currently, we always allow
such sys$mprotect() calls to succeed, which effectively allows anyone to
circumvent the effect of MS_RDONLY. We should solve this one way or another.
VFS no longer deals with inodes in public API, only with custodies and file
descriptions. Talk directly to the file system if you need to operate on a
inode. In most cases you actually want to go though VFS, to get proper
permission check and other niceties. For this to work, you have to provide a
custody, which describes *how* you have opened the inode, not just what the
inode is.
We're going to make use of it in the next commit. But the idea is we want to
know how this File (more specifically, InodeFile) was opened in order to decide
how chown()/chmod() should behave, in particular whether it should be allowed or
not. Note that many other File operations, such as read(), write(), and ioctl(),
already require the caller to pass a FileDescription.
And move canonicalized_path() to a static method on LexicalPath.
This is to make it clear that FileSystemPath/canonicalized_path() only
perform *lexical* canonicalization.
Allow file system implementation to return meaningful error codes to
callers of the FileDescription::read_entire_file(). This allows both
Process::sys$readlink() and Process::sys$module_load() to return more
detailed errors to the user.
For singly-indirect blocks, "callback" is just "add_block".
For doubly-indirect blocks, "callback" is the lambda function
iterating on singly-indirect blocks: so instead of adding itself to the
list, the doubly-indirect block will add all its childs, but they add
themselves again when they run the callback of singly-indirect blocks.
And nothing adds the doubly-indirect block itself :(
This leads to a double free of all child blocks of the doubly-indirect
block, which is the failed assert described in #1549.
Closes: #1549.
read_block() and write_block() now accept the count (how many bytes to read
or write) and offset (where in the block to start; defaults to 0). Using these
new APIs, we can avoid doing copies between intermediary buffers in a lot more
cases. Hopefully this improves performance or something.
This was supposed to be the foundation for some kind of pre-kernel
environment, but nobody is working on it right now, so let's move
everything back into the kernel and remove all the confusion.
Since a Region is basically a view into a potentially larger VMObject,
it was always necessary to include the Region starting offset when
accessing its underlying physical pages.
Until now, you had to do that manually, but this patch adds a simple
Region::physical_page() for read-only access and a physical_page_slot()
when you want a mutable reference to the RefPtr<PhysicalPage> itself.
A lot of code is simplified by making use of this.
The next commit is going to make it bigger again by increasing the size of Lock,
so make use of bitfields to make sure FileDescription still fits into 64 bytes,
and so can still be allocated with the SlabAllocator.
In contrast to the previous patchset that was reverted, this time we use
a "special" method to access a file with block size of 512 bytes (like
a harddrive essentially).
We were allowing this dangerous kind of thing:
RefPtr<Base> base;
RefPtr<Derived> derived = base;
This patch changes the {Nonnull,}RefPtr constructors so this is no
longer possible.
To downcast one of these pointers, there is now static_ptr_cast<T>:
RefPtr<Derived> derived = static_ptr_cast<Derived>(base);
Fixing this exposed a ton of cowboy-downcasts in various places,
which we're now forced to fix. :^)
This was causing some obvious-in-hindsight but hard to spot bugs where
we'd implicitly convert the bool to an integer type and carry on with
the number 1 instead of the actual value().
Also, duplicate data in dbg() and klog() calls were removed.
In addition, leakage of virtual address to kernel log is prevented.
This is done by replacing kprintf() calls to dbg() calls with the
leaked data instead.
Also, other kprintf() calls were replaced with klog().
We don't have to log the process name/PID/TID, dbg() automatically adds
that as a prefix to every line.
Also we don't have to do .characters() on Strings passed to dbg() :^)
You can now mmap a file as private and writable, and the changes you
make will only be visible to you.
This works because internally a MAP_PRIVATE region is backed by a
unique PrivateInodeVMObject instead of using the globally shared
SharedInodeVMObject like we always did before. :^)
Fixes#1045.
Linux creates holes in block lists for all-zero content. This is very
reasonable and we can now handle that situation as well.
Note that we're not smart enough to generate these holes ourselves yet,
but now we can at least read from such files.
If we get an -ENOENT when resolving the target because of some part, that is not
the very last part, missing, we should just return the error instead of panicking
later :^)
To test:
$ mkdir /tmp/foo/
$ mv /tmp/foo/ /tmp/bar/
Related to https://github.com/SerenityOS/serenity/issues/1253
This is apparently a special case unlike any other, so let's handle it
directly in VFS::mkdir() instead of adding an alternative code path into
VFS::resolve_path().
Fixes https://github.com/SerenityOS/serenity/issues/1253
This was only used by HashTable::dump() which I used when doing the
first HashTable implementation. Removing this allows us to also remove
most includes of <AK/kstdio.h>.
Previously this API would return an InodeIdentifier, which meant that
there was a race in path resolution where an inode could be unlinked
in between finding the InodeIdentifier for a path component, and
actually resolving that to an Inode object.
Attaching a test that would quickly trip an assertion before.
Test: Kernel/path-resolution-race.cpp
This implementation uses the new helper method of Bitmap called
find_longest_range_of_unset_bits. This method looks for the biggest
range of contiguous bits unset in the bitmap and returns the start of
the range back to the caller.
We should use dbg() instead of dbgprintf() as much as possible to
protect ourselves against format string bugs. Here's a bunch of
conversions in Ext2FS.
This changes copyright holder to myself for the source code files that I've
created or have (almost) completely rewritten. Not included are the files
that were significantly changed by others even though it was me who originally
created them (think HtmlView), or the many other files I've contributed code to.
A process has one of three veil states:
- None: unveil() has never been called.
- Dropped: unveil() has been called, and can be called again.
- Locked: unveil() has been called, and cannot be called again.
When using dbg() in the kernel, the output is automatically prefixed
with [Process(PID:TID)]. This makes it a lot easier to understand which
thread is generating the output.
This patch also cleans up some common logging messages and removes the
now-unnecessary "dbg() << *current << ..." pattern.
Sergey suggested that having a non-zero O_RDONLY would make some things
less confusing, and it seems like he's right about that.
We can now easily check read/write permissions separately instead of
dancing around with the bits.
This patch also fixes unveil() validation for O_RDWR which previously
forgot to check for "r" permission.
This syscall is a complement to pledge() and adds the same sort of
incremental relinquishing of capabilities for filesystem access.
The first call to unveil() will "drop a veil" on the process, and from
now on, only unveiled parts of the filesystem are visible to it.
Each call to unveil() specifies a path to either a directory or a file
along with permissions for that path. The permissions are a combination
of the following:
- r: Read access (like the "rpath" promise)
- w: Write access (like the "wpath" promise)
- x: Execute access
- c: Create/remove access (like the "cpath" promise)
Attempts to open a path that has not been unveiled with fail with
ENOENT. If the unveiled path lacks sufficient permissions, it will fail
with EACCES.
Like pledge(), subsequent calls to unveil() with the same path can only
remove permissions, not add them.
Once you call unveil(nullptr, nullptr), the veil is locked, and it's no
longer possible to unveil any more paths for the process, ever.
This concept comes from OpenBSD, and their implementation does various
things differently, I'm sure. This is just a first implementation for
SerenityOS, and we'll keep improving on it as we go. :^)
Background: DoubleBuffer is a handy buffer class in the kernel that
allows you to keep writing to it from the "outside" while the "inside"
reads from it. It's used for things like LocalSocket and TTY's.
Internally, it has a read buffer and a write buffer, but the two will
swap places when the read buffer is exhausted (by reading from it.)
Before this patch, it was internally implemented as two Vector<u8>
that we would swap between when the reader side had exhausted the data
in the read buffer. Now instead we preallocate a large KBuffer (64KB*2)
on DoubleBuffer construction and use that throughout its lifetime.
This removes all the kmalloc heap traffic caused by DoubleBuffers :^)
Before this, we would end up in memcpy() churn hell when a program was
doing repeated write() calls to a file in /tmp.
An even better solution will be to only grow the VM allocation of the
underlying buffer and keep using the same physical pages. This would
eliminate all the memcpy() work.
I've benchmarked this using g++ to compile Kernel/Process.cpp.
With these changes, compilation goes from ~35 sec to ~31 sec. :^)
Previously, VFS::open() would only use the passed flags for permission checking
purposes, and Process::sys$open() would set them on the created FileDescription
explicitly. Now, they should be set by VFS::open() on any files being opened,
including files that the kernel opens internally.
This also lets us get rid of the explicit check for whether or not the returned
FileDescription was a preopen fd, and in fact, fixes a bug where a read-only
preopen fd without any other flags would be considered freshly opened (due to
O_RDONLY being indistinguishable from 0) and granted a new set of flags.
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
Symlink resolution is now a virtual method on an inode,
Inode::resolve_as_symlink(). The default implementation just reads the stored
inode contents, treats them as a path and calls through to VFS::resolve_path().
This will let us support other, magical files that appear to be plain old
symlinks but resolve to something else. This is particularly useful for ProcFS.
It turns out we don't even need to store the whole custody chain, as we only
ever access its last element. So we can just store one custody. This also fixes
a performance FIXME :^)
Also, rename parent_custody to out_parent.
Also don't uncache inodes when they reach i_links_count==0 unless they
also have no ref counts other than the +1 from the inode cache.
This prevents the FS from deleting the on-disk inode too soon.
This makes the implementation easier to follow, but also fixes multiple issues
with the old implementation. In particular, it now deals properly with . and ..
in paths, including around mount points.
Hopefully there aren't many new bugs this introduces :^)
You can now bind-mount files and directories. This essentially exposes an
existing part of the file system in another place, and can be used as an
alternative to symlinks or hardlinks.
Here's an example of doing this:
# mkdir /tmp/foo
# mount /home/anon/myfile.txt /tmp/foo -o bind
# cat /tmp/foo
This is anon's file.
We now support these mount flags:
* MS_NODEV: disallow opening any devices from this file system
* MS_NOEXEC: disallow executing any executables from this file system
* MS_NOSUID: ignore set-user-id bits on executables from this file system
The fourth flag, MS_BIND, is defined, but currently ignored.
O_EXEC is mentioned by POSIX, so let's have it. Currently, it is only used
inside the kernel to ensure the process has the right permissions when opening
an executable.
At the moment, the actual flags are ignored, but we correctly propagate them all
the way from the original mount() syscall to each custody that resides on the
mounted FS.
No need to pass around RefPtr<>s and NonnullRefPtr<>s and no need to
heap-allocate them.
Also remove VFS::mount(NonnullRefPtr<FS>&&, StringView path) - it has been
unused for a long time.
In order to preserve the absolute path of the process root, we save the
custody used by chroot() before stripping it to become the new "/".
There's probably a better way to do this.
The chroot() syscall now allows the superuser to isolate a process into
a specific subtree of the filesystem. This is not strictly permanent,
as it is also possible for a superuser to break *out* of a chroot, but
it is a useful mechanism for isolating unprivileged processes.
The VFS now uses the current process's root_directory() as the root for
path resolution purposes. The root directory is stored as an uncached
Custody in the Process object.
As Sergey pointed out, it's silly to have proper entries for . and ..
in TmpFS when we can just synthesize them on the fly.
Note that we have to tolerate removal of . and .. via remove_child()
to keep VFS::rmdir() happy.
This encourages callers to strongly reference file descriptions while
working with them.
This fixes a use-after-free issue where one thread would close() an
open fd while another thread was blocked on it becoming readable.
Test: Kernel/uaf-close-while-blocked-in-read.cpp
Instead of using the FIFO's memory address as part of its absolute path
identity, just use an incrementing FIFO index instead.
Note that this is not used for anything other than debugging (it helps
you identify which file descriptors refer to the same FIFO by looking
at /proc/PID/fds
Supervisor Mode Access Prevention (SMAP) is an x86 CPU feature that
prevents the kernel from accessing userspace memory. With SMAP enabled,
trying to read/write a userspace memory address while in the kernel
will now generate a page fault.
Since it's sometimes necessary to read/write userspace memory, there
are two new instructions that quickly switch the protection on/off:
STAC (disables protection) and CLAC (enables protection.)
These are exposed in kernel code via the stac() and clac() helpers.
There's also a SmapDisabler RAII object that can be used to ensure
that you don't forget to re-enable protection before returning to
userspace code.
THis patch also adds copy_to_user(), copy_from_user() and memset_user()
which are the "correct" way of doing things. These functions allow us
to briefly disable protection for a specific purpose, and then turn it
back on immediately after it's done. Going forward all kernel code
should be moved to using these and all uses of SmapDisabler are to be
considered FIXME's.
Note that we're not realizing the full potential of this feature since
I've used SmapDisabler quite liberally in this initial bring-up patch.
This has been a FIXME for a long time. We now apply the provided
read/write permissions to the constructed FileDescription when opening
a File object via File::open().
We were running without the sticky bit and mode 777, which meant that
the /tmp directory was world-writable *without* protection.
With this fixed, it's no longer possible for everyone to steal root's
files in /tmp.
In order to ensure a specific owner and mode when the local socket
filesystem endpoint is instantiated, we need to be able to call
fchmod() and fchown() on a socket fd between socket() and bind().
This is because until we call bind(), there is no filesystem inode
for the socket yet.
If we're creating something that should have a different owner than the
current process's UID/GID, we need to plumb that all the way through
VFS down to the FS functions.
To accomodate file creation, path resolution optionally returns the
last valid parent directory seen while traversing the path.
Clients will then interpret "ENOENT, but I have a parent for you" as
meaning that the file doesn't exist, but its immediate parent directory
does. The client then goes ahead and creates a new file.
In the case of "/foo/bar/baz" where there is no "/foo", it would fail
with ENOENT and "/" as the last seen parent directory, causing e.g the
open() syscall to create "/baz".
Covered by test_io.
It was previously possible to write to read-only file descriptors,
and read from write-only file descriptors.
All FileDescription objects now start out non-readable + non-writable,
and whoever is creating them has to "manually" enable reading/writing
by calling set_readable() and/or set_writable() on them.
This code never worked, as was never used for anything. We can build
a much better SHM implementation on top of TmpFS or similar when we
get to the point when we need one.
The new PCI subsystem is initialized during runtime.
PCI::Initializer is supposed to be called during early boot, to
perform a few tests, and initialize the proper configuration space
access mechanism. Kernel boot parameters can be specified by a user to
determine what tests will occur, to aid debugging on problematic
machines.
After that, PCI::Initializer should be dismissed.
PCI::IOAccess is a class that is derived from PCI::Access
class and implements PCI configuration space access mechanism via x86
IO ports.
PCI::MMIOAccess is a class that is derived from PCI::Access
and implements PCI configurtaion space access mechanism via memory
access.
The new PCI subsystem also supports determination of IO/MMIO space
needed by a device by checking a given BAR.
In addition, Every device or component that use the PCI subsystem has
changed to match the last changes.
This patch hardens /proc a bit by making many things only accessible
to UID 0, and also disallowing access to /proc/PID/ for anyone other
than the UID of that process (and superuser, obviously.)
Threads now have numeric priorities with a base priority in the 1-99
range.
Whenever a runnable thread is *not* scheduled, its effective priority
is incremented by 1. This is tracked in Thread::m_extra_priority.
The effective priority of a thread is m_priority + m_extra_priority.
When a runnable thread *is* scheduled, its m_extra_priority is reset to
zero and the effective priority returns to base.
This means that lower-priority threads will always eventually get
scheduled to run, once its effective priority becomes high enough to
exceed the base priority of threads "above" it.
The previous values for ThreadPriority (Low, Normal and High) are now
replaced as follows:
Low -> 10
Normal -> 30
High -> 50
In other words, it will take 20 ticks for a "Low" priority thread to
get to "Normal" effective priority, and another 20 to reach "High".
This is not perfect, and I've used some quite naive data structures,
but I think the mechanism will allow us to build various new and
interesting optimizations, and we can figure out better data structures
later on. :^)
This is memory that's loaded from an inode (file) but not modified in
memory, so still identical to what's on disk. This kind of memory can
be freed and reloaded transparently from disk if needed.
Dirty private memory is all memory in non-inode-backed mappings that's
process-private, meaning it's not shared with any other process.
This patch exposes that number via SystemMonitor, giving us an idea of
how much memory each process is responsible for all on its own.
We were listing the total number of user/super pages as the number of
"available" pages in the system. This was then misinterpreted in the
SystemMonitor program and displayed wrong in the GUI.
Cautiously use 5 as a limit for now so that we don't blow the stack.
This can be increased in the future if we are sure that we won't be
blowing the stack, or if the implementation is changed to not use
recursion :^)
Every process keeps its own ELF executable mapped in memory in case we
need to do symbol lookup (for backtraces, etc.)
Until now, it was mapped in a way that made it accessible to the
program, despite the program not having mapped it itself.
I don't really see a need for userspace to have access to this right
now, so let's lock things down a little bit.
This patch makes it inaccessible to userspace and exposes that fact
through /proc/PID/vm (per-region "user_accessible" flag.)
Currently only Ext2FS and TmpFS supports InodeWatchers. We now fail
with ENOTSUPP if watch_file() is called on e.g ProcFS.
This fixes an issue with FileManager chewing up all the CPU when /proc
was opened. Watchers don't keep the watched Inode open, and when they
close, the watcher FD will EOF.
Since nothing else kept /proc open in FileManager, the watchers created
for it would EOF immediately, causing a refresh over and over.
Fixes#879.
The kernel now supports basic profiling of all the threads in a process
by calling profiling_enable(pid_t). You finish the profiling by calling
profiling_disable(pid_t).
This all works by recording thread stacks when the timer interrupt
fires and the current thread is in a process being profiled.
Note that symbolication is deferred until profiling_disable() to avoid
adding more noise than necessary to the profile.
A simple "/bin/profile" command is included here that can be used to
start/stop profiling like so:
$ profile 10 on
... wait ...
$ profile 10 off
After a profile has been recorded, it can be fetched in /proc/profile
There are various limits (or "bugs") on this mechanism at the moment:
- Only one process can be profiled at a time.
- We allocate 8MB for the samples, if you use more space, things will
not work, and probably break a bit.
- Things will probably fall apart if the profiled process dies during
profiling, or while extracing /proc/profile
Okay, one "dunce hat" point for me. The new PTY majors conflicted with
PATAChannel. Now they are 200 for master and 201 for slave, not used
by anything else.. I hope!
It's now possible to get purgeable memory by using mmap(MAP_PURGEABLE).
Purgeable memory has a "volatile" flag that can be set using madvise():
- madvise(..., MADV_SET_VOLATILE)
- madvise(..., MADV_SET_NONVOLATILE)
When in the "volatile" state, the kernel may take away the underlying
physical memory pages at any time, without notifying the owner.
This gives you a guilt discount when caching very large things. :^)
Setting a purgeable region to non-volatile will return whether or not
the memory has been taken away by the kernel while being volatile.
Basically, if madvise(..., MADV_SET_NONVOLATILE) returns 1, that means
the memory was purged while volatile, and whatever was in that piece
of memory needs to be reconstructed before use.
Using int was a mistake. This patch changes String, StringImpl,
StringView and StringBuilder to use size_t instead of int for lengths.
Obviously a lot of code needs to change as a result of this.
The main thread of each kernel/user process will take the name of
the process. Extra threads will get a fancy new name
"ProcessName[<tid>]".
Thread backtraces now list the thread name in addtion to tid.
Add the thread name to /proc/all (should it get its own proc
file?).
Add two new syscalls, set_thread_name and get_thread_name.
This patch adds these I/O counters to each thread:
- (Inode) file read bytes
- (Inode) file write bytes
- Unix socket read bytes
- Unix socket write bytes
- IPv4 socket read bytes
- IPv4 socket write bytes
These are then exposed in /proc/all and seen in SystemMonitor.
This defaults to 1500 for all adapters, but LoopbackAdapter increases
it to 65536 on construction.
If an IPv4 packet is larger than the MTU, we'll need to break it into
smaller fragments before transmitting it. This part is a FIXME. :^)
Turns out we can use abi::__cxa_demangle() for this, and all we need to
provide is sprintf(), realloc() and free(), so this patch exposes them.
We now have fully demangled C++ backtraces :^)
Previously it was not possible to see what each thread in a process was
up to, or how much CPU it was consuming. This patch fixes that.
SystemMonitor and "top" now show threads instead of just processes.
"ps" is gonna need some more fixing, but it at least builds for now.
Fixes#66.
This adds a call to set_metadata_dirty(true) to
Ext2FS::write_directory(). This fixes a bug wherein InodeWatchers
weren't alerted on directory updates.
Scheduling priority is now set at the thread level instead of at the
process level.
This is a step towards allowing processes to set different priorities
for threads. There's no userspace API for that yet, since only the main
thread's priority is affected by sched_setparam().
Files opened with O_DIRECT will now bypass the disk cache in read/write
operations (though metadata operations will still hit the disk cache.)
This will allow us to test actual disk performance instead of testing
disk *cache* performance, if that's what we want. :^)
There's room for improvment here, we're very aggressively flushing any
dirty cache entries for the specific block before reading/writing that
block. This is done by walking the entire cache, which may be slow.
Don't keep Inodes around in memory forever after we've interacted with
them once. This is a slight performance pessimization when accessing
the same file repeatedly, but closing it for a while in between.
Longer term we should find a way to keep a limited number of unused
Inodes cached, whichever ones we think are likely to be used again.
When creating a new directory, we set the initial size to 1 block.
This meant that we were allocating a block up front, but the Inode's
internal block list cache was not populated with this block.
This broke write_bytes() on a new directory, since it assumed that
the block list cache would be up to date if the call to write_bytes()
would not change the directory's size.
This patch fixes the issue in two ways: First, we cache the initial
block list created for new directories.
Second, we now repopulate the block list cache in write_bytes() if it
is empty when we get there. This is basically just a safety fallback
to avoid having this kind of bug in the future.
We can't be calling the virtual FS::flush_writes() in order to flush
the disk cache from within the disk cache, since an FS subclass may
try to do cache stuff in its flush_writes() implementation.
Instead, separate out the implementation of DiskBackedFS's flushing
logic into a flush_writes_impl() and call that from the cache code.
Also cache the block group descriptor table in a KBuffer on file system
initialization, instead of on first access.
This reduces pressure on the kmalloc heap somewhat.
We were writing out the full block list whenever Ext2FSInode::resize()
was called, even if the old and new sizes were identical.
This patch makes it a no-op, which drastically improves "cp" speed
since we now take full advantage of the up-front call to ftruncate().
If there are not enough free blocks in the filesystem to accomodate
growing an Inode, we should fail with ENOSPC before even starting to
allocate blocks.
Add a simple cache to Ext2FS where we keep block bitmaps along with a
dirty bit. This allows us to coalesce bitmap flushes, giving us a nice
~3x improvement in disk_benchmark write speeds.
Store the cached super block as an ext2_super_block member instead of
caching it in a ByteBuffer and using a casting helper everywhere.
This patch also combines reading/writing of the super block into a
single disk device operation (instead of two.)
Add dedicated internal types for Int64 and UnsignedInt64. This makes it
a bit more straightforward to work with 64-bit numbers (instead of just
implicitly storing them as doubles.)
I have no idea why this was here. It makes no sense. If you're trying
to find out if something is a directory, why wouldn't you be allowed to
ask that about a FIFO? :^)
Thanks to Brandon for spotting this!
Also, while we're here, cache the directory state in a bool member so
we don't have to keep fetching inode metadata when checking this
repeatedly. This is important since sys$read() now calls it.
Previously, procfs$pid_fds would return nothing when called
for a process that had either no open files or a non-existent
handle. This could cause problems when a userspace program
expected a valid Json response.
Procfs$pid_fs now returns an empty array in the aforementioned
cases.
This reverts commit 1cca5142af.
This appears to be causing intermittent triple-faults and I don't know
why yet, so I'll just revert it to keep the tree in decent shape.
Background: DoubleBuffer is a handy buffer class in the kernel that
allows you to keep writing to it from the "outside" while the "inside"
reads from it. It's used for things like LocalSocket and PTY's.
Internally, it has a read buffer and a write buffer, but the two will
swap places when the read buffer is exhausted (by reading from it.)
Before this patch, it was internally implemented as two Vector<u8>
that we would swap between when the reader side had exhausted the data
in the read buffer. Now instead we preallocate a large KBuffer (64KB*2)
on DoubleBuffer construction and use that throughout its lifetime.
This removes all the kmalloc heap traffic caused by DoubleBuffers :^)
The Cache entries found in `DiskBackedFileSystem` are now stored in a
`KBuffer` object, instead of relying on `kmalloc_eternal`. The number
of entries was exceeding that of the number of bytes allocated to
`kmalloc_eternal`, which in turn caused `mount()` to fail epically
when called.
This patch adds three separate per-process fault counters:
- Inode faults
An inode fault happens when we've memory-mapped a file from disk
and we end up having to load 1 page (4KB) of the file into memory.
- Zero faults
Memory returned by mmap() is lazily zeroed out. Every time we have
to zero out 1 page, we count a zero fault.
- CoW faults
VM objects can be shared by multiple mappings that make their own
unique copy iff they want to modify it. The typical reason here is
memory shared between a parent and child process.
This patch overloads Inode::is_directory() with a faster version that
doesn't require instantiating the whole InodeMetadata.
If you have an Ext2FSInode&, calling is_directory() should be instant
since we can just look directly at the raw inode bits.
If we want to make a new entry in the disk cache when it's completely
full of dirty blocks, we'll now synchronously flush the writes at that
point. Maybe it's not ideal, but at least we can keep going.
This way clients are not required to have instantiated ByteBuffers
and can choose whatever memory scheme works best for them.
Also converted some of the Ext2FS code to use stack buffers instead.
Instead of having DiskBackedFS allocate a ByteBuffer, leave it to each
client to provide buffer space.
This is significantly faster in many cases where we can use a stack
buffer and avoid heap allocation entirely.
The hashmap cache was ridiculously slow and hurt us more than it helped
us. This patch replaces it with a flat memory cache that keeps up to
10'000 blocks in cache with a simple dirty bit.
The syncd task will wake up periodically and call flush_writes() on all
file systems, which now causes us to traverse the cache and write all
dirty blocks to disk.
There's a ton of room for improvement here, but this itself is already
drastically better when doing repeated GCC invocations.
1) Off-by-one in block allocation when block size != 1 KB
Due to a quirk in the on-disk layout of ext2, file systems with a block
size of 1 KB have block #1 as their first block, while all others start
on block #0.
2) We had no fallback mechanism when the preferred group was full
We now allocate blocks from the preferred block group as long as it's
possible, and fall back to a simple scan through all groups when the
preferred one is full.
This is a freelist allocator with static size classes that works as a
complement to the generic kmalloc(). It's a lot faster than kmalloc()
since allocation just means popping from the freelist.
It's also significantly more compact when there are a lot of objects
smaller than the minimum kmalloc chunk size (32 bytes.)
This patch enables it for the Region and PhysicalPage classes.
In the PhysicalPage (8 bytes) case, it's a huge improvement since we
no longer waste 75% of the storage allocated.
There are also a number of ways this can be improved, so let's keep
working on it going forward.
Also added some assertions to DirectoryEntry in case someone tries to
instantiate them with names that would overflow the name buffer.
DirectoryEntry is a crappy data structure, and the name buffer is also
crappy. Added a FIXME about replacing it with something nicer.
Before this patch, the DirectoryEntry::name buffer would overflow if
you did "touch extremely-long-file-name". Duh.
Fixes#538.
This was a workaround to be able to build on case-insensitive file
systems where it might get confused about <string.h> vs <String.h>.
Let's just not support building that way, so String.h can have an
objectively nicer name. :^)
- TmpFSInode::write_bytes() needs to allow non-zero offsets
- TmpFSInode::read_bytes() wasn't respecting the offset
GCC puts the temporary files generated during compilation in /tmp,
so this exposed some bugs in TmpFS.
The complication is around /proc/sys/ variables, which were attached
to inodes. Now they're their own thing, and the corresponding inodes
are lazily created (as all other ProcFS inodes are) and simply refer
to them by index.
It is now possible to unmount file systems from the VFS via `umount`.
It works via looking up the `fsid` of the filesystem from the `Inode`'s
metatdata so I'm not sure how fragile it is. It seems to work for now
though as something to get us going.
This is more logical and allows us to solve the problem of
non-blocking TCP sockets getting stuck in SocketRole::None.
The only complication is that a single LocalSocket may be shared
between two file descriptions (on the connect and accept sides),
and should have two different roles depending from which side
you look at it. To deal with it, Socket::role() is made a
virtual method that accepts a file description, and LocalSocket
internally tracks which FileDescription is the which one and
returns a correct role.
Now that there can't be multiple clones of the same fd,
we only need to track whether or not an fd exists on each
side. Also there's no point in tracking connecting fds.
After a fork, the parent and the child are supposed to share
the same file description. For example, modifying the current
offset of a file description is visible in both of them.
Using a HashTable to track "all instances of Foo" is only useful if we
actually need to look up entries by some kind of index. And since they
are HashTable (not HashMap), the pointer *is* the index.
Since we have the pointer, we can just use it directly. Duh.
This increase sizeof(VMObject) by two pointers, but removes a global
table that had an entry for every VMObject, where the cost was higher.
It also avoids all the general hash tabling business when creating or
destroying VMObjects. Generally we should do more of this. :^)
This is comprised of five small changes:
* Keep a counter for tx/rx packets/bytes per TCP socket
* Keep a counter for tx/rx packets/bytes per network adapter
* Expose that data in /proc/net_tcp and /proc/netadapters
* Convert /proc/netadapters to JSON
* Fix up ifconfig to read the JSON from netadapters
This is not perfect as it uses a lot of VM, but since the buffers are
supposed to be temporary it's not super terrible.
This could be improved by giving back the unused VM to the kernel's
RangeAllocator after finishing the buffer building.
This makes VMObject 8 bytes smaller since we can use the array size as
the page count.
The size() is now also computed from the page count instead of being
a separate value. This makes sizes always be a multiple of PAGE_SIZE,
which is sane.
InodeVMObject is a VMObject with an underlying Inode in the filesystem.
AnonymousVMObject has no Inode.
I'm happy that InodeVMObject::inode() can now return Inode& instead of
VMObject::inode() return Inode*. :^)
The VMObject name was always either the owning region's name, or the
absolute path of the underlying inode.
We can reconstitute this information if wanted, no need to keep copies
of these strings around.
This has several significant changes to the networking stack.
* Significant refactoring of the TCP state machine. Right now it's
probably more fragile than it used to be, but handles quite a lot
more of the handshake process.
* `TCPSocket` holds a `NetworkAdapter*`, assigned during `connect()` or
`bind()`, whichever comes first.
* `listen()` is now virtual in `Socket` and intended to be implemented
in its child classes
* `listen()` no longer works without `bind()` - this is a bit of a
regression, but listening sockets didn't work at all before, so it's
not possible to observe the regression.
* A file is exposed at `/proc/net_tcp`, which is a JSON document listing
the current TCP sockets with a bit of metadata.
* There's an `ETHERNET_VERY_DEBUG` flag for dumping packet's content out
to `kprintf`. It is, indeed, _very debug_.
Instead of generating ByteBuffers and keeping those lying around, have
these filesystems generate KBuffers instead. These are way less spooky
to leave around for a while.
Since FileDescription will keep a generated file buffer around until
userspace has read the whole thing, this prevents trivially exhausting
the kmalloc heap by opening many files in /proc for example.
The code responsible for generating each /proc file is not perfectly
efficient and many of them still use ByteBuffers internally but they
at least go away when we return now. :^)
- "seekable": whether the fd is seekable or sequential.
- "class": which kernel C++ class implements this File.
- "offset": the current implicit POSIX API file offset.
- You must now have superuser privileges to use mount().
- We now verify that the mount point is a valid path first, before
trying to find a filesystem on the specified device.
- Convert some dbgprintf() to dbg().
Processes can now have an icon assigned, which is essentially a 16x16 RGBA32
bitmap exposed as a shared buffer ID.
You set the icon ID by calling set_process_icon(int) and the icon ID will be
exposed through /proc/all.
To make this work, I added a mechanism for making shared buffers globally
accessible. For safety reasons, each app seals the icon buffer before making
it global.
Right now the first call to GWindow::set_icon() is what determines the
process icon. We'll probably change this in the future. :^)
This makes assertion failures generate backtraces again. Sorry to everyone
who suffered from the lack of backtraces lately. :^)
We share code with the /proc/PID/stack implementation. You can now get the
current backtrace for a Thread via Thread::backtrace(), and all the traces
for a Process via Process::backtrace().
The syscall is quite simple:
int watch_file(const char* path, int path_length);
It returns a file descriptor referring to a "InodeWatcher" object in the
kernel. It becomes readable whenever something changes about the inode.
Currently this is implemented by hooking the "metadata dirty bit" in
Inode which isn't perfect, but it's a start. :^)
Committing some things my hands did while browsing through this code.
- Mark all leaf classes "final".
- FileDescriptionBlocker now stores a NonnullRefPtr<FileDescription>.
- FileDescriptionBlocker::blocked_description() now returns a reference.
- ConditionBlocker takes a Function&&.
"Blocking" is not terribly informative, but now that everything is
ported over, we can force the blocker to provide us with a reason.
This does mean that to_string(State) needed to become a member, but
that's OK.
I was messing around with this to tell the compiler that these functions
always return the same value no matter how many times you call them.
It doesn't really seem to improve code generation and it looks weird so
let's just get rid of it.
This is obviously more readable. If we ever run into a situation where
ref count churn is actually causing trouble in the future, we can deal with
it then. For now, let's keep it simple. :^)
Also tweak the kernel's Makefile to use -nostdinc and -nostdinc++.
This prevents us from picking up random headers from ../Root, which may
include older versions of kernel headers.
Since we still need <initializer_list> for Vector, we specifically include
the necessary GCC path. This is a bit hackish but it works for now.
This is prep work for supporting HashMap with NonnullRefPtr<T> as values.
It's currently not possible because many HashTable functions require being
able to default-construct the value type.
Update ProcessManager, top and WSCPUMonitor to handle the new format.
Since the kernel is not allowed to use floating-point math, we now compile
the JSON classes in AK without JsonValue::Type::Double support.
To accomodate large unsigned ints, I added a JsonValue::Type::UnsignedInt.
It's kinda funny how I can make a mistake like this in Serenity and then
get so used to it by spending lots of time using this API that I start to
believe that this is how printf() always worked..
Previously the check for an empty part would happen before the
check for access and for the parent being a directory, and so an
error in those would not be detected.
If a symlink is not the last part of a path, the remaining part
of the path has to be further resolved against the symlink target.
With this, a path containing a symlink always resolves to the target
of the first (leftmost) symlink in it, for example any path of form
/proc/self/... resolves to the corresponding /proc/pid directory.
StringView character buffer is not guaranteed to be null-terminated;
in particular it will not be null-terminated when making a substring.
This means that the buffer can not be used with C functions that expect
a null-terminated string. Instead, StringView provides a convinient
operator == for comparing it with Strings and C stirngs, so use that.
This fixes /proc/self/... resolution failures in ProcFS, since the name
("self") passed to ProcFSInode::lookup() would not be null-terminated.
This significantly reduces the pressure on the kernel heap when
allocating a lot of pages.
Previously at about 250MB allocated, the free page list would outgrow
the kernel's heap. Given that there is no longer a page list, this does
not happen.
The next barrier will be the kernel memory used by the page records for
in-use memory. This kicks in at about 1GB.
After reading a bunch of POSIX specs, I've learned that a file descriptor
is the number that refers to a file description, not the description itself.
So this patch renames FileDescriptor to FileDescription, and Process now has
FileDescription* file_description(int fd).
Walk the custody cache and try to reuse an existing one when possible.
The VFS is responsible for updating them when something happens that would
cause the described relationship to change.
This is definitely not perfect but it does work for the basic scenarios like
renaming and removing directory entries.
When encountering a symlink, we abandon the custody chain we've been working
on and start over with a new one (by recursing into a new resolution call.)
Caching symlinks in the custody model would be incredibly difficult to get
right with all the extra invalidation it would require, so let's just not.
The current working directory is now stored as a custody. Likewise for a
process executable file. This unbreaks /proc/PID/fd which has not been
working since we made the filesystem bigger.
This still needs a bunch of work, for instance when renaming or removing
a file somewhere, we have to update the relevant custody links.
A custody is kind of a directory entry abstraction that represents a single
entry in a parent directory that tells us the name of a child inode.
The idea here is for path resolution to produce a chain of custody objects.
Also run it across the whole tree to get everything using the One True Style.
We don't yet run this in an automated fashion as it's a little slow, but
there is a snippet to do so in makeall.sh.
